Loading

อุปกรณ์ตรวจสภาพแบริ่ง Bearing Fault Detector


สอบถามราคา

เป็นอุปกรณ์ตรวจสภาพแบริ่งและเกียร์โดยเทคนิคพิเศษในการตรวจจับค่า Peak แล้วแปลงสัญญาณเป็นสัญญาณ 4-20 mA เพื่อนำไปต่อกับชุดแสดงผล, PLC, DCS, หรือ SCADA นอกจากนี้ยังให้สัญญาณค่าความสั่นสะเทือนแบบ Overall โดยแปลงเป็นสัญญาณ 4-20 mA อีกช่องสัญญาณหนึ่ง รวมถึงค่าสัญญาณดิบ Raw Vibration Signal ผ่าน BNC เพื่อให้ใช้เครื่องวิเคราะห์ความสั่นสะเทือนนำสัญญาณไปใช้ได้ นับว่าเป็นอุปกรณ์แบบ 3 in 1 ที่ให้สัญญาณครบถ้วน


ประเภทสินค้า : เครื่องวัด วิเคราะห์ความสั่นสะเทือน และอุปกรณ์ > อุปกรณ์ประกอบการวัดและวิเคราะห์ความสั่นสะเทือน (Vibration Analysis Hardware)
แท็ก : PCB IMI Sensor Bearing Fault Detector ตรวจสภาพแบริ่ง Vibration Transmitter Vibration 682C05 PCB Piezotronics

The Bearing Fault Detector is a DIN rail mount vibration transmitter that works in conjunction with a typical ICP® accelerometer. It supplies the constant current power required by the accelerometer, processes data and has the following three outputs: 4-20 mA proportional to peak amplitude, 4-20 mA proportional to overall vibration level and raw vibration signal via BNC connector for diagnostic analysis. To obtain peak amplitude (measured in a 7 second window) the signal is passed through a high pass filter, rectified and run through a high speed peak detection circuit. To obtain overall vibration level, the signal is passed through a low pass filter, integrated when velocity is required, processed through a true rms circuit and scaled, depending on the desired output type (rms or calculated peak). Bearing Fault Detector output is compatible with any vibration monitoring device or plant equipment that accepts a 4-20 mA signal. It can provide 24/7 protection when used with a PLC, DCS, or SCADA system. It can also be used with numerous off-the-shelf meters, alarms and recorders.